Home / Rooting / Rooting Samsung Galaxy J7 Plus (SM-C710F) with TWRP Custom Recovery
Rooting Samsung Galaxy J7 Plus twrp magisk guide

Rooting Samsung Galaxy J7 Plus (SM-C710F) with TWRP Custom Recovery

Easy Step On Rooting Samsung Galaxy J7 Plus (Nougat 7.1.1)

Rooting Samsung Galaxy J7 Plus (2017) is easy since the rooting guide was released last February of this year 2018, we will guide you on how you can root your J7+ in an easy way, take note that to achieve the rooting process we will first install or flash TWRP custom recovery, just read carefully on the steps provided are and you will achieve rooting your device without problem.

There are so many good benefits when rooting your device but you can read our Advantage and Disadvantages of rooting your smartphone.

This rooting tutorial is only compatible with or supported to the selected versions and those are;

  • Samsung Galaxy J7 Plus SM-C710F Spain (AMO)
  • Baltic (SEB)
  • Luxembourg (LUX)
  • Hungary (XEH)
  • Luxembourg (LUX)
  • Italy (ITV)
  • Iran (THR)
  • Poland (PLUS) (PLS)
  • Egypt (EGY)
  • Germany (DBT)
  • Spain (PHE)
  • Switzerland (AUT)
  • Slovakia (ORX)
  • France (XEF)
  • Switzerland (AUT) and All Other Models.

Note: Android Crawl is not responsible for any damage or issues you might encounter this rooting process is tested to thousand users so Root your device at your own RISK.

How To Install TWRP Recovery for Samsung Galaxy J7 Plus

Remember that there is two possible way on rooting your device the first one is using the Magisk and the other one is via TWRP, so we will install or flash TWRP custom recovery here just follow the steps provided and of course make sure you Download Required Files.

Disclaimer: Rooting your Android Phones will void your Warranty and might damage your devices such as bootloop and any other problems you might be encountered, please read the Advantage and Disadvantages of rooting your Android Phones, We do not own any files provided here all is big thanks to developer and developer.

Samsung Galaxy J7 Plus USB Driver

We need to install the Samsung Galaxy USB Driver first before doing any process, this is essential to perform installing TWRP recovery successfully, download the USB driver and install it to your PC or laptop.

Important Thing to Do Before Rooting Your Device

  1. Perform a Full-backup of your data, there are lots of backup apps like titanium backup, helium and many more, some of the apps required rooting access to fully perform backup some of it is available for non-rooted users, this process will wipe out your data so please perform a backup first.
  2. Ensure that you have at least 80% of Battery to avoid any issues.
  3. Better sync your data like phonebooks and photos.
  4. Download Required Files Provided.
  5. Enable the USB Debugging to follow the steps provided.

Related Post:

Steps by Step Guide for Flashing TWRP Recovery

After you perform all the important things we listed above you are now ready to start flashing the TWRP Recovery.

  1. Download Odin Tool (Odin3_v3.13.1 .zip – 3.4 MB) and TWRP Custom Recovery (.tar)image file.
  2. Install the USB driver for Samsung Galaxy J7 Plus from your PC or Laptop.
  3. Extract the Odin Flash Tool to your PC and Open the application.
  4. Make sure you enable USB debugging from your PC and then TURN-OFF your J7+.
  5. Boot Samsung Galaxy J7 Plus into Download Mode
  6. While the phone is off Press and Hold Key Volume Down + Home Key Button + Power Button wait until you see a warning message then press the Volume Up to proceed into Download Mode.
  7. Connect your Smartphone J7 Plus while it is on Download Mode and the Odin tool Application is open as well on your PC.
  8. Importantly make sure you see that Odin Tool detected your device, just check this at the top left corner below the ID:COM once you see some data (Added!!) and the box below of it is blue then it means your device is detected, if not please remove the USB cable and re-install the USB Driver.
  9. On the Odin Tool app while your S9 is connected click the button AP/PDA button and locate the file .tar (TWRP file) and hit ok to load it.
  10. Make sure that you uncheck the Auto Reboot.
  11. Make sure that Reset Time is check.
  12. Review all the steps above and once you are sure to hit the START button to begin the TWRP flashing, do not touch or remove your phone while flashing is on progress, just wait until the process is completed.
  13. Once flashing of TWRP is completed you can now turn off again your device/remove your battery and boot now your device to TWRP custom recovery simply press and hold the key Volume Up + Home Key + Power Button
  14. Done.

Rooting Samsung Galaxy J7 Plus Using SuperSU Zip files

Since we’re done installing or flashing the TWRP using Odin Tool we are now ready to Flash the SuperSU zip files via TWRP custom Recovery from your J7 Plus.

  1. Download SuperSU .zip (SuperSU-v2.82-201705271822 .zip) files and place it to your SD Card or Internal Storage [readmore here].
  2. Turn-Off your J7 Plus and Boot to TWRP Custom Recovery Mode
    press and hold the key Volume Up + Home Key + Power Button
  3. Once you see the TWRP released the key and tap WIPE then tap the Cache Data.
  4. Go back to Main TWRP screen and TAP install, then locate the SuperSU zip files you downloaded earlier from your J7+.
  5. Wait until the flashing of SuperSU is completed, you can now reboot your device.
  6. Download the Root Checker to ensure that your device is successfully rooted.
  7. Done.

Rooting Samsung Galaxy J7 Plus Using Magisk via TWRP

  1. Download Magisk and place it to your SD Card or internal storage.
    Magisk v16.4 | Magisk 5.7.0 | Magisk Uninstaller v5.7
  2. Turn-Off your J7 Plus and Boot to TWRP Custom Recovery Mode
    press and hold the key Volume Up + Home Key + Power Button
  3. Once you see the TWRP released the key and tap WIPE then tap the Cache Data.
  4. Go back to Main TWRP screen and TAP install, then locate the Magisk zip files you downloaded earlier from your J7+.
  5. Wait until the flashing of Magisk is completed, you can now reboot your device.
  6. Download the Root Checker to ensure that your device is successfully rooted.
  7. Done.

That’s it, you can now start developing or customizing your device, remove bloatware which is not useful to you, or flash tweaks, if you have any questions please leave a comment below.

Search Tags

Search Tags

How to Root Samsung Galaxy J7 Plus, root Samsung Galaxy J7 Plus, root my Samsung Galaxy J7 Plus tutorial, guide on rooting Samsung Galax7 J7 Plus step by step

Check Also

Samsung Galaxy J8 Firmware Oreo (Stock ROM) + Guide How To Flash

Samsung Galaxy J8 Firmware Oreo (Stock ROM) + Guide How To Flash

Download Samsung Galaxy J8 Firmware Samsung Galaxy J8 firmware is essential for different reasons or …